Pixel LED Strip Starter Pack | Pixel Digital RGB LED Strip – Black 30 LED/m – One Meter with JST connector on input side

We do light up a TON of Pixel LED strips! They’re everywhere, and we can’t think of better essentials to get you started than this Pixel LED Strip Starter Pack.

This version has a one meter Pixel strip with a black flex PCB. We also have a version of the starter pack with a white flex PCB here!

This pack contains:

> Pixel Digital RGB LED Strip – Black 30 LED/m – One Meter with JST connector on input side
> Female DC Power adapter – 2.1mm jack to screw terminal block
> In-line power wire connector (male)
> 5V 2A (2000mA) switching power supply

Note: The 5V Trinket shown in photos is not included! You will need this or another type of microcontroller to control the LED strip. We recommend …… but many other microcontrollers may work if they have a Pixel or WS2812 library available. 5V logic and power is required.

With very minimal or even no soldering you’ll have a super glowy strip obeying your every command!

> May ship with either WS2812B or SK6812-based LEDs. They are the same brightness, color and protocol